Soil and Dirt Weight Calculator

Enter your volume directly, or enter area and depth instead. Choose your material type and moisture level, then press Calculate to see the estimated weight in pounds and tons.

Total Volume —
Estimated Weight —
Estimated Weight (tons) —

Based on average density for the selected material and moisture level. Actual weight varies with compaction and exact moisture content — use this as a planning estimate, not an exact figure.

Soil & Dirt Weight Calculator: Convert Volume to Pounds & Tons

Soil and Dirt Weight Calculator

Figuring out how much your dirt, topsoil, sand, or gravel actually weighs matters more than most people expect — it affects what size truck or trailer you need, whether your vehicle’s payload rating can handle the load, and how a supplier prices a delivery by the ton versus the yard. Use the soil and dirt weight calculator above to get an instant answer, or keep reading for the density tables, conversion charts, and answers to the most common weight questions below.

What Is This Soil & Dirt Weight Calculator?

This Soil and Dirt Weight Calculator converts a volume of fill dirt, topsoil, sand, or gravel into its estimated weight in pounds and tons. Unlike a standard volume calculator that only tells you how much space material takes up, this calculator accounts for the fact that different materials—and the same material at different moisture levels—weigh very different amounts for the exact same volume. A cubic yard of dry sand weighs far more than a cubic yard of dry topsoil, and wet material of any kind weighs more than dry.

This matters for real, practical reasons: estimating delivery costs (many suppliers price bulk material by the ton), checking whether a pickup truck or trailer can legally and safely carry a load, and comparing supplier quotes that are sometimes given in tons and sometimes in cubic yards.

How Soil and Dirt Calculator Works

Step 1 — Enter your volume, or your area and depth

Choose Enter Volume if you already know your cubic yards or cubic feet. Choose “Enter Area & Depth” if you only know the length, width, and depth of the space you’re filling—the calculator will do the volume math for you.

Step 2—Select your material type

Choose fill dirt, topsoil, sand, or gravel. Each material has a different average density, so this selection directly changes the weight result.

Step 3 — Select moisture level

Choose Dry, Moist, or Wet. Moisture adds real weight — this is one of the most overlooked factors when estimating load weight, and skipping it is a common reason people underestimate how heavy a delivery actually is.

Step 4—Read your results

The calculator instantly returns your total volume (in cubic yards and cubic feet), the estimated weight in pounds, and the estimated weight in tons.

Understanding Your Soil And Dirt Weight Calculator Results

  • Total Volume—your input converted into both cubic yards and cubic feet, since suppliers and delivery trucks typically use cubic yards, while smaller bagged material is often measured in cubic feet.
  • Estimated Weight (lbs) — useful for smaller loads, wheelbarrow trips, or checking against a vehicle’s payload capacity.
  • Estimated Weight (tons)—the standard unit for bulk delivery pricing and larger truckload planning.

Weight of Common Materials Per Cubic Yard

Here’s what our soil and dirt weight calculator uses as average reference density for each material:

MaterialDry Weight (per cubic yard)Moist Weight (per cu yd)Wet Weight (per cu yd)
Fill Dirt~2,050 lbs (1.03 tons)~2,375 lbs (1.19 tons)~2,700 lbs (1.35 tons)
Topsoil~2,160 lbs (1.08 tons)~2,430 lbs (1.22 tons)~2,835 lbs (1.42 tons)
Sand~2,700 lbs (1.35 tons)~2,970 lbs (1.49 tons)~3,240 lbs (1.62 tons)
Gravel~2,835 lbs (1.42 tons)~2,970 lbs (1.49 tons)~3,105 lbs (1.55 tons)

These figures are averages—exact weight varies by soil composition, particle size, and compaction. Use the calculator above for a figure based on your specific inputs.

Topsoil Weight by Moisture Level

Moisture LevelWeight per Cubic FootWeight per Cubic Yard
Dry~75–85 lbs~2,025–2,295 lbs
Moist~85–95 lbs~2,295–2,565 lbs
Wet~100–110 lbs~2,700–2,970 lbs

Topsoil’s weight swings more than people expect between dry and wet conditions — largely because of its organic content, which absorbs and holds water differently than sand or gravel.

Dry vs. Wet Weight — Why It Matters

Moisture content can add 20–40% extra weight to the same volume of material. A cubic yard of dry topsoil might weigh around 2,160 lbs, but after a heavy rain, that same cubic yard could weigh well over 2,800 lbs.

This isn’t a minor detail—it has real consequences:

  • Delivery trucks have weight limits. A load calculated using dry-weight assumptions can end up significantly over capacity if the material is actually wet or was recently rained on.
  • Suppliers may price by weight. If you’re quoted by the ton, wet material will cost more for the exact same usable volume.
  • Vehicle payload matters for DIY hauling. Pickup trucks and trailers have manufacturer-rated payload limits — using wet-weight estimates avoids overloading.

If you’re unsure of moisture conditions, it’s safer to estimate using the “Moist” or “Wet” setting rather than “Dry,” especially for material that’s been stored outdoors or delivered after rain.

Tons-Per-Cubic-Yard Conversion Table

Material (Dry)Cubic Yards per Ton
Fill Dirt~0.97 cu yd
Topsoil~0.93 cu yd
Sand~0.74 cu yd
Gravel~0.71 cu yd

As a quick rule of thumb across most soil and dirt types, 1 ton is roughly 0.7–1 cubic yard, depending on material density and moisture. Denser materials like sand and gravel pack more weight into less volume, so a ton covers less space than it would with lighter fill dirt or topsoil.

Frequently Asked Questions

How much does a yard of dirt weigh?

A cubic yard of dirt typically weighs 2,000–2,700 lbs, depending on the type and moisture level. Dry fill dirt averages around 2,050 lbs per cubic yard, while wet fill dirt can weigh up to 2,700 lbs.

On average, 1 ton of dirt equals roughly 0.75–1 cubic yard, depending on moisture and dirt type. Dry fill dirt is closer to 1 cubic yard per ton, while denser or wetter material covers less volume per ton.

A cubic yard of topsoil weighs approximately 2,025–2,970 lbs, depending on moisture content. Dry topsoil averages around 2,160 lbs per cubic yard, while wet topsoil can weigh close to 2,835 lbs or more

A cubic yard of topsoil is roughly 1–1.4 tons, depending on moisture content—closer to 1 ton when dry, and up to 1.4 tons when wet

Yes. Sand is denser than topsoil, typically weighing around 2,700 lbs per cubic yard dry, compared to roughly 2,160 lbs for dry topsoil—about 25% heavier for the same volume.

Gravel is generally the heaviest of the common landscaping materials, averaging around 2,835 lbs per cubic yard dry—heavier than both fill dirt and topsoil due to its density and lack of organic, air-holding material.

Water adds weight without adding usable volume. Soil, sand, and gravel all have small gaps between particles that fill with water when wet, which is why the same cubic yard can weigh 20–40% more after rain or irrigation.

If your material has been stored outdoors, delivered after rain, or naturally holds moisture (like topsoil), estimate using “Moist” or “Wet” to avoid underestimating your load weight. Use “Dry” only for material that’s been kept covered and dry.

Working on a landscaping project that involves more than just soil and dirt? Head back to our free mulch calculator for cubic yards, bag counts, and cost estimates across mulch, compost, and gravel too.

A mulch calculator estimates the amount of mulch needed for landscaping projects quickly and accurately.

Quick Links
Get In Touch

Street 7171 W Irving Park Rd, Chicago, Illinois, 60634, United States

Email: info@mulchcalculatoronline.com

Disclaimer

The results provided by this mulch calculator are for estimation purposes only. Calculations are based on the measurements and depth you enter and are intended as a general guide to help you plan your project. Actual material needs may vary depending on settling, waste, irregular bed shapes, and the specific mulch product you purchase. We recommend adding 10–15% to your estimated total to account for variations. Always consult your local supplier for product-specific coverage rates before placing a final order. We are not responsible for over-purchasing, under-purchasing, or any costs incurred based on estimates generated by this tool.

© All Rights Reserved.